Lens Cleaning

After removing the lens from your eye, place the concave side of the lens up in the palm of your hand.

Drip two drops of Boston Advance Cleaner on the lens
(If using Boston Simplus, use this for all cleaning/rinsing/disinfection processes).

Gently rub each lens surface for 20 seconds in a circular motion.

Rinsing

Rinse the lens using an adequate amount of saline solution recommended by your eye care practitioner to completely remove the Boston Advance Cleaner and debris from the lens surfaces.

Disinfection

Place each lens into the proper well of the case. Completely fill each well with fresh Boston Advance Conditioning /Boston Simplus solution. Close the case and allow lenses to soak for the recommended time period.

Re-conditioning

To relieve minor irritation and discomfort during lens wear, you can use Boston Rewetting Drops when needed.

DON’T FORGET THE CASE !

The case itself can be the source of bacteria. So it needs to be cared for as well.

After removing your GP lenses from the case, be certain to rinse the case with distilled or boiling water and allow it to air dry.
In addition, the case should be replaced every 3 months.

 

Go to Top ->

Case Cleaning